Isa Bar-On, Ph.D.

Publications

M. Koslowske, I. Bar-On, H. Woodward, "Investigation of Device Performance and Process Capability for Accurate SOFC Cost Estimates", Proceedings 9th International Symposium on Solid Oxide Fuel Cells. American Electrochemical Society, Quebec, Canada. 2005.
M. Koslowske, H. Benson, I. Bar-On, R. Kirchain, "A Performance Based Multi-Process Cost Model for SOFC’s", Ceram. Eng. Sci. Proc., Vol 25 (3) (2004) 375-380.
Heather Benson-Woodward, Mark Koslowske, Randolph Kirchain, and Isa Bar-On, "A Performance Based, Multi-Process Cost Model for Solid Oxide Fuel Cells", in Solid State Ionics ---- 2002, Knauth et al. Eds., Vol 756, FF 4.10. (2003).
Isa Bar-On, Randy Kirchain, Richard Roth, "Technical cost analysis for PEM fuel cells", Journal of Power Sources 109 (2002) 71-75.
S. Saadat, J. Salichs, M. Noori, Z. Hou, H. Davoodi, I. Bar-on, Y. Suzuki and A. Masuda, "An overview of vibration and seismic applications of NiTi shape memory alloy", Smart Mater. Struct. 11 (2002) 218-229.
M. G. Jenkins, J. A. Salem, G. D. Quinn, I. Bar-On, "Development, Verification, and Implementation of a National Full-Consensus Fracture Toughness Test Method Standard for Advanced Ceramics", Fracture resistance testing of monolithic and composite brittle materials, Salem et al. Eds., ASTM STP 1409, 2002, 49-75.
I. Bar-On, G.D. Quinn, M. J. Jenkins, and J.A. Salem, "Development of ASTM C 1421-99 Standard Test Methods for Determination of Fracture Toughness for Advanced Ceramics", Fatigue and Fracture Mechanics 32nd Volume, STP 1406, R. Chona, Ed., American Society for Testing and Materials, West Conshohocken, PA, 2001, pp. 315-335.
S. Grendahl, R. Bert, K. Cho, I. Bar-On, "The Effects of Residual Stress, Loading, and Crack Geometry on SEPB Fracture Toughness Test Results", Journal of Testing and Evaluation, 29 (3): 271-276 May 2001.
Veda-Anne Ulcickas, Isa Bar-On, Christopher A. Brown, "Using Area-Scale Relations to Investigate Measured Fracture Toughness in Y-TZP Materials", Ceramic Transactions. Vol. 122, 211-224, 2001.
J. M. Sledziewske, K. Nunan, T. Robinson, Isa Bar-On, "Curvature Measurement of Polysilicon MEMS Structures Using Spectroscopic Reflectometry", in SEM Annual Conference on Experimental and Applied Mechanics, June, 2001, Portland, Oregon.
S. Grendahl, R. Bert, K. Cho, I. Bar-On, "The Effects of Residual Stress and Loading Geometry on SEPB Fracture Toughness Test Results", J. Am. Ceram. Soc., 83 [10] 2625-27, 2000.
G. D. Quinn, M. J. Jenkins, J. Salem, I. Bar-On, "Standardization of Fracture Toughness Testing of Ceramics in the United States", The Korean Journal of Ceramics, Vol. 4, pp. 311-32, 1998.
G.D. Quinn, J. A. Salem, I. Bar-On, M. G. Jenkins, (invited paper) "The New ASTM Fracture Toughness of Advanced Ceramics Standard: PS 070-97," Ceramic Engineering and Science Proceedings, 19, No. 3, pp 565,1998.
L. Hozer, Y. Chiang, S. Ivanova, and I. Bar-On, "Liquid-Exchange Processing and Properties of SiC-Al Composites", J. Mat. Res., 12, 1785, 1997.
I. Bar-On, R. N. Katz, "Selection of Ceramic Materials and Their Applications," in Handbooks of Materials Selection for Engineering Applications, Marcel Dekker, 1997, 245.
G. Quinn, M. Jenkins, I. Bar-On, and J. Salem, "New ASTM Fracture Toughness of Advanced Ceramics Standard", Key Engineering Materials, Vol 132-136, Part 3, Proceedings of the European Ceramic Society Conference, J. Baxter, L. Cot, R. Fordham, V. Gabis, Y. Hellot, M. Lefebvre, H. Le Dousall, A. Le Sech, R. Naslain, and A. Sevagan, eds., pp 2115-2118,1997.
K. Cho, R. Nathan Katz, I. Bar-On, "Uniaxial Strength and Mode I Fracture Toughness of Hot Pressed Silicon Carbide (SiC) Materials", ARL-TR-1406, Army Research Laboratory, Aberdeen Proving Ground, MD, June 1997.
Bar-On, F. I. Baratta, K. Cho, "Crack Stability and its Effect on Single-Edge-Precracked Beam (SEPB) Fracture Toughness of Hot-Pressed Silicon Nitride Beam Specimens," ARL-TR-1407, Army Research Laboratory, Aberdeen Proving Ground, MD, June 1997.
I. Bar-On, F.I. Baratta, K. Cho, "Crack Stability and its Effect on Fracture Toughness of Hot Pressed Silicon Nitride Beam Specimens", J. Am. Ceram. Soc., 79 [9] 2300-2308, 1996.
I. Bar-On, C. A. Brown, W. A. Johnsen, A. M. Calomino, D. N. Brewer, "Fractal Analysis of Fracture Surfaces Using the Patchwork Method", in Fractography of Glasses and Ceramics III, Ceramic Transactions, 395, 1996.
K. Cho, R. N. Katz, and I. Bar-On, "Strength and Fracture Toughness of Hot Pressed Titanium Diboride,", Ceram. Sci. and Eng. Proceed., 17, pp375-382, 1996.
L. Hozer, Y. Chiang, S. Ivanova, I. Bar-On, "Processing and Mechanical Properties of SiC-Metal Interpenetrating Composites", in: Covalent Ceramics III-Science and Technology of Non-Oxides, Materials Research Society, 423, 1996.
K. Cho, F. I. Baratta, I. Bar-On, "Fracture Toughness Measurements of Two Specimen Geometries Considering Stability in Brittle Materials, ARL-TR-1184, Army Research Laboratory, Aberdeen Proving Ground, MD, August 1996.
K. Cho, Robert N. Katz, I. Bar-On, "Mechanical Properties of Hot Pressed Titanium Diboride," ARL-TR-1185, Army Research Laboratory, Aberdeen Proving Ground, MD, August 1996.
V.G. DeGiorgi, P. Matic, I. Bar-On, G.M.C. Lee, "An Experimental and Computational Investigation of Crack Growth Initiation in Three-Point Bend Fracture Specimens", Eng. Fract. Mech., 50, pp 1-9, 1995.
K. Cho and I. Bar-On, "Crack Stability Analysis and Fracture Toughness of Ceramic Bend Bars with a Modified Section", Exp. Mech., 35, 104, 1995.
K. Cho, R. N. Katz, and I. Bar-On, "Strength and Fracture Toughness of Hot Pressed SiC Materials, Ceram. Sci. and Eng. Proceed. 16, pp 105-112, 1995.
I. Bar-On, K. Cho, D.J. Woodilla, S. Knecht, "Reliability Predictions for Alumina Plates With and Without Cavities," Ceram. Eng. Sci., 16, 1995.
K. Cho, I. Bar-On and F. I. Baratta, "Fracture Toughness Measurements of Two Specimen Geometries Considering Stability", in Advanced Materials and Process Technology for Mechanical Failure Prevention, Proc. of the 48th Meeting of the Mechanical Failure Prevention Group, 421-432, 1994.
R. N. Katz, S. Grendahl, K. Cho, I. Bar-On, W. Rafaniello, "Fracture Toughness of Ceramics in the AlN-SiC System", Ceram. Eng, Sci., 15, 877-884, 1994.
K. Cho, B. F. Hantz IV, I. Bar-On, "Stress Intensity Factor Calculation for a Modified Round Bend Bar by 3-D Finite Element Analysis", Int. J. Fract., 62,163-170, 1993.
D. Woodilla, M Buonomo, I. Bar-On, R. N. Katz, T.J. Whalen, "Elevated Temperature Behavior of High Strength Silicon Carbide", J. Am. Ceram. Soc., 76 [1] 249-52, 1993.
S.A. Mariano, D. Friel, I. Bar-On, "Elevated Temperature Properties of SiC-AlN Particulate Composites", Ceram. Eng. Sci., 14, 1077-1088, 1993.
G. D. Quinn, J. Salem, I. Bar-On, K. Cho, M. Foley, Ho Fang, "Fracture Toughness of Advanced Ceramics at Room Temperature", J. Res. Natl. Inst. Stand. Technol., 97, 579, 1992.
I. Bar-On and S. Mariano, High Temperature Fracture Toughness Behavior of Some Non-Oxide Ceramic Composites Using the Precracked Double Anvil Method, report to the Ballistic Impact Behavior Branch, U.S. Army Materials Technology Laboratory, April, 1992.
A. D. Gallant, I. Bar-On, F.R. Tuler, "The Effect of a Residual Stress Field on the J-R Curve of HY-100 Steel", in Elastic-Plastic Test Methods: the User's Experience (second Volume), ASTM Special Technical Publication 1114, J.A. Joyce Ed., American Society for Testing and Materials, Philadelphia, 1991, pp 260-272.
I. Bar-On, "Applied Fracture Mechanics", in Engineered Materials Handbook, Volume 4: Ceramics and Glasses, ASM International, 1991.
I. Bar-On, B.T. Pothier, R.N. Katz, M.J. Slavin, " Cyclic Fatigue Crack Propagation in Silicon Carbide Whisker Reinforced Alumina", in Fatigue of Advanced Materials, R.O. Ritchie, R.H. Dauskardt and B.N. Cox Eds. MCEP LTD, Birmingham, pp 307-321,1991.
I. Bar-On, "Fatigue Crack Propagation in Monolithic and Whisker Reinforced Ceramics", Mechanical Behavior of Materials-IV, Mashiro Jono, Tatsuo Inoue Eds., Pergamon Press, 1991.
I. Bar-On, J.T. Beals, G.L. Leatherman, and C.M. Murray, "Fracture Toughness of Ceramic Precracked Bend Bars", Journal of the American Ceramic Society, 73, pp 2519-2522, 1990.
I. Bar-On and J.T. Beals, "Fatigue in Silicon Nitride Bend Bars", Fatigue 90: Proceedings of the Fourth International Conference on Fatigue and Fatigue Thresholds, Vol. II, H. Kitagawa and T. Tanaka Eds., pp 793-798,1990.
J.T. Beals and I. Bar-On, "Fracture Toughness and Fatigue Crack Propagation of Silicon Nitride with two Different Microstructures", Proceedings of the 14th Annual Conference on Composites and Advanced Ceramics, J. B, Wachtman Ed., 11, pp 1061-1071,1990.
I. Bar-On, J.T. Beals, "Fatigue in Silicon Nitride Bend Bars in Proceedings of the 1990 SEM Spring Conference on Experimental Mechanics, 1990, pp 690-695.
I. Bar-On, J.T. Beals, C.M. Murray, "Fracture Toughness Testing of Ceramics and Ceramic Composites Using Pre-Cracked Bend Bars", in Proceedings of the 1990 SEM Spring Conference on Experimental Mechanics, 1990, pp 529-534.
Bar-On, F.R. Tuler, and W. M. Howerton, "Effect of Prestrain on the J-Resistance Curve of HY-100 Steel", American Society for Testing and Materials Special Technical Publication, ASTM STP 995, J.D. Landes and A.D. Saxena, Eds., pp. 244-248, 1989.
M. Murray, G.L. Leatherman, I. Bar-On, and D.W. Kellerman, "The Effect of Brazing of the Mechanical Properties of Cofired Ceramic Packages", in 1989 Proceedings of the International Symposium on Microelectronics, Baltimore, Maryland, the International Society for Hybrid Microelectronics.
M. Murray, G.L. Leatherman, I. Bar-On, and D.W. Kellerman, "The Effect of Brazing of the Mechanical Properties of Cofired Ceramic Packages", Proceedings of the Industry University Materials Institute, Denver 1989, pp 867-877.
M. Murray, K. Macchiarola, M. O'Day, G.L. Leatherman, I. Bar-On, and J. C. Marra, "Mechanical Property Relationships of New Ceramic Substrate Materials, a Comparative Study", Proceedings of the Industry University Materials Conference II, Advanced Materials Institute, Denver 1989, pp 778-782.
Bar-On, F.R. Tuler, and I. Roman, "An Evaluation of the Strength and Fracture Toughness Distributions of Sintered Iron Powder Materials," Failure Mechanisms in High Performance Materials, J.G. Early, T.R. Shives and J.H. Smith, Eds., Cambridge Press, NY, pp 78-86,1985.
Bar-On, I. Roman, and F.R. Tuler, "Comparison of Analytical and Experimental Stress Intensity Coefficients for Chevron V Notched Three Point Bend Specimens", Chevron Notched Specimens: Testing and Stress Analysis, J.H. Underwood, S.W. Freiman and F.I. Baratta, Eds., ASTM Special Technical Publication STP 855, pp 98-113,1984.