| Manufacturing
Engineering Seminar Spring 2003
|
|
|
Model-Based Machining Process Optimization
and Its Applications in the Manufacturing of Jet Engine Components |
January 23,
2003 |
. |
Dr. Changsheng
Guo from UTRC
|
|
|
|
|
Research on Meso/Micro Rapid Manufacturing |
February
6, 2003 |
. |
Dr. Xiaochu Li from
University of Wisconsin-Madison
|
|
|
|
|
Furnace Surveying for Heat Treating Operations |
February
11, 2003 |
. |
Dan Donaldson from
DataPaq
|
|
|
|
|
Studies of Nanostructured Al93Fe3Cr2Ti2
for High Temperature Structural Applications |
February
27, 2003 |
| |
|
|
Analytical Design: A New Design Paradigm |
March 13,
2003 |
. |
Dr. Haechang Gea
from Rutgers University |
|
|
|
|
Engineering Models Driven by Statistical
Methods for Quality and Performance Improvement in Complex Assembly
Systems |
March 20,
2003 |
. |
Dr. Darek Ceglarek
from University of Wisconsin-Madison
|
|
|
|
|
Micro/Meso-scale Mechanical Manufacturing
- Opportunities and Challenges - |
March 27,
2003 |
. |
Dr. Kori Ehman from
Northwestern University
|
|
|
|
|
Nanoscale ductile cutting of brittle
materials |
April 3 ,
2003 |
. |
Dr. Xiaoping Li
from National University of Singapore
|
|
|
|
|
Micromachined deformable mirrors |
April 4,
2003 |
. |
Thomas Bifano, Fraunhofer
Professor and Chair
Manufacturing Engineering Department
of Boston University
|
|
|
|
|
From Product Design Through Process
Design for Precision-Machined Components and Assemblies… |
April 9,
2003 |
. |
Mike Shipulski,
Ph.D., CMfgE
Engineering Manager, Hypertherm, Inc., Hanover, NH
|
|
|
|
|
Multidisciplinarity in Manufacturing
R&D Programs Brazing Research as an Example |
April 10,
2003 |
. |
Dr. Dusan Sekulic
from University of Kentucky
|
|
|
|
|
Physics-based heterogeneous object
modeling |
April 17,
2003 |
. |
Dr. Xiaoping Qian,
from GE Global Research Center in Schenectday, NY
|
|
|
|
|
Thermally Activated Transient Plasticity
and Tube Forming Process |
April 18,
2003 |
. |
Dr. Xin Wu from
Wayne State University
|
|
|
|
|
Thermally Activated Transient Plasticity
and Tube Forming Process |
April 24,
2003 |
. |
Professor Teiichi
Ando from Northeastern University
|
|
|
|